Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 537 / 652

List of Sample Output set chassis display message (Creating) on page 511
set chassis display message (Deleting) on page 511
set chassis display message (EX Series and QFX Series) on page 512
set chassis display message (QFabric Systems - Interconnect Device) on page 512
set chassis display message (QFabric Systems - Node Device) on page 514
Output Fields See show chassis craft-interface or show chassis lcd for an explanation of output fields.
Sample Output
set chassis display message (Creating)
The following example shows how to set the display message and verify the result:
user@host>
set chassis display message "NOC contact Dusty (888) 555-1234"
message sent
user@host> show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4 5 6 7
-------------------------------
Green .. *.. * *.
Red ........
LCD screen:
+--------------------+
|NOC contact Dusty |
|(888) 555-1234 |
+--------------------+
set chassis display message (Deleting)
The following example shows how to delete the display message and verify that the
message is removed:
user@host> set chassis display message ""
message sent
user@host>
show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4 5 6 7
-------------------------------
Green .. *.. * *.
Red ........
LCD screen:
+--------------------+
|host |
|Up: 0+17:05:47 |
| |
|Temperature OK |
+--------------------+
511 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands