Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 611 / 652

•
show fabric administration inventory infrastructure on page 594
•
show fabric administration inventory director-group status on page 589
•
show fabric administration inventory node-devices on page 599
•
show fabric administration inventory node-groups on page 601
•
show fabric administration inventory interconnect-devices on page 597
•
show fabric inventory on page 604
List of Sample Output show fabric administration inventory on page 587
show fabric administration inventory detail on page 587
show fabric administration inventory summary on page 588
Output Fields Table 99 on page 585 lists the output fields for the
show fabric administration inventory
command. Output fields are listed in the approximate order in which they appear.
Table 99: show fabric administration inventory Output Fields
Level of Output Field Description Field Name
detail
none
Type of QFabric system component being viewed. Possible values include Node group , Interconnect
device
,
Fabric control
,
Fabric manager
,
Diagnostic routing engine
,
Director group
, and
Ungrouped Node
device
.
Item
detail
none
Hardware serial identifier of a QFabric system component. When you configure an alias name for a
component, the ID is displayed. Identifier
detail
none
Status of a QFabric system component: either
Connected
or
Disconnected
, depending on whether or
not the Director software has detected keepalive messages for the listed component.
Connection
detail
none
Whether or not the configuration for a QFabric system component has been received and installed.
The configuration can be
Configured
,
Failed
(with details about the failure),
Pending
(in the process
of being written or retried), or
Unknown
.
Configuration
detail
none
Name of the Node groups associated with the QFabric system, and the Node devices assigned to
each Node group. The group can be either
Connected or Disconnected , depending on whether or not
the Director software has detected keepalive messages for the devices in the group. This field also
displays the serial ID for the Node group and the status for the Node group.
Node group
detail
none
Name of the Interconnect devices associated with the Node group. The device can be either
Connected
or
Disconnected
, depending on whether or not the Director software has detected keepalive messages
for the device. This field also displays the serial ID and configuration status for the Interconnect device.
Interconnect device
detail
none
Name of the primary virtual Junos Routing Engine associated with the QFabric system. The fabric
manager Routing Engine can be either
Connected or Disconnected , depending on whether or not the
Director software has detected keepalive messages for this virtual device. It also displays the identifier
and configuration status for the fabric manager Routing Engine.
Fabric manager
585 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands