Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 345 / 652

jsrv up up
jsrv.1 up up inet 128.0.0.127/2
lo0 up up
lo0.0 up up inet 10.255.195.96 --> 0/0
iso
47.0005.80ff.f800.0000.0108.0001.0102.5519.5096
inet6 abcd::10:255:195:96
fe80::2ac0:da0f:fc31:1e80
lsi up up
me0 up up
me0.0 up up inet 10.94.195.96/24
mtun up up
pimd up up
pime up up
tap up up
vlan up up
vme up up inet 192.168.157.26/24
Meaning In the output of the
show virtual-chassis status
command, if all four members appear,
the Virtual Chassis is operational.
In the output of the
show interfaces terse
command, if all interfaces that connect to the
QFabric system devices are listed as up (such as ge-0/0/39, ge-1/0/39, ge-2/0/39, and
ge-3/0/39 for the Interconnect devices; ge-0/0/40, ge-1/0/40, and ge-2/0/40 for the
Director devices; ge-0/0/0 through ge-0/0/7 for the Node devices; and xe-0/1/0, xe-0/1/2,
xe-1/1/0, xe-1/1/2, xe-2/1/0, xe-2/1/2, xe-3/1/0, and xe-3/1/2 for the inter-Virtual Chassis
connections), the control plane is properly connected.
Verifying the QFabric System Control Plane—Virtual Chassis VC1
Purpose Verify that your second Virtual Chassis is operational.
Action Connect to the Junos OS CLI of Virtual Chassis VC1, either from your management network
or from the console port of the master Virtual Chassis member. In operational mode,
enter the
show virtual-chassis status
and
show interfaces terse
commands.
Sample Output
{master:0}
user@vc1>
show virtual-chassis status
Virtual Chassis ID: c809.2c5d.9f8a
Mastership Neighbor List
Member ID Status Serial No Model priority Role ID Interface
0 (FPC 0) Prsnt BP0210471477 ex4200-48t 128 Master* 1 vcp-1
1 (FPC 1) Prsnt BP0210460182 ex4200-48t 128 Backup 0 vcp-0
2 vcp-1
2 (FPC 2) Prsnt BP0210458725 ex4200-48t 128 Linecard 1 vcp-0
3 vcp-1
3 (FPC 3) Prsnt BP0210477180 ex4200-48t 128 Linecard 2 vcp-0
Member ID for next new member: 4 (FPC 4)
{master:0}
user@vc1>
show interfaces terse
Interface Admin Link Proto Local Remote
ge-0/0/0 up up
319 Copyright © 2015, Juniper Networks, Inc.
Chapter 16: Initial Setup