Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 541 / 652

show chassis device-mode
Supported Platforms QFabric System , QFX Series standalone switches
Syntax show chassis device-mode
Release Information Command introduced in Junos OS Release 11.2 for the QFX Series.
Description Display information about the operating mode of the device. For example, QFX3500
devices operate either as a single switch in standalone mode or as a QFabric system
Node device in node-device mode.
NOTE: Issue the
show chassis device-mode
command only when your
management station is connected directly to the device over a console port
connection.
Options There are no options for this command.
Required Privilege
Level
admin
Related
Documentation
Converting the Device Mode for a QFabric System Component on page 277
•
•
request chassis device-mode on page 481
•
Understanding Interconnect Devices on page 21
•
Understanding Node Devices on page 24
List of Sample Output show chassis device-mode (Interconnect Device Mode) on page 516
show chassis device-mode (Interconnect Device Mode, but Node
Device-Ready) on page 516
show chassis device-mode (Interconnect Device Mode, but
Standalone-Ready) on page 516
show chassis device-mode (Node Device Mode) on page 516
show chassis device-mode (Node Device Mode, but Interconnect
Device-Ready) on page 516
show chassis device-mode (Node Device Mode, but Standalone-Ready) on page 516
show chassis device-mode (Standalone Mode) on page 516
show chassis device-mode (Standalone Mode, but Interconnect
Device-Ready) on page 516
show chassis device-mode (Standalone Mode, but Node Device-Ready) on page 517
Output Fields Table 92 on page 516 lists the output fields for the
show chassis device-mode
command.
Output fields are listed in the approximate order in which they appear.
515 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands