Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 388 / 652

3.
Select the
QFX Series Product Fabric
option button, and click
Continue
.
The Generate Licenses - QFX Series Product Fabrics page appears.
4.
In the
Software Serial No
field, enter the software serial number for your QFabric
system, and press the Tab key.
The starting MAC address and number of MAC addresses for your QFabric system are
displayed.
5.
(Optional) Click
Download/Email MAC Address
to download or e-mail the MAC address
range.
The Download/Email MAC Address page appears.
To download the MAC address range:
• Select the Download to this computer option button, and click OK .
To e-mail the MAC address range:
•
Select the
Send e-mail to e-mail ID
option button, and click
OK
.
Related
Documentation
Performing the QFabric System Initial Setup on a QFX3100 Director Group on page 362
•
Performing the QFabric System Initial Setup on a QFX3100 Director Group
Supported Platforms
QFabric System
You must perform the initial setup of the QFX3100 Director group through the console
port. (Before configuring the QFX3100 Director group, see
“Installing and Connecting a
QFX3100 Director Device” on page 143 .)
Before you begin connecting and configuring a QFX3100 Director group, set the following
parameter values on the console server or PC:
•
Baud Rate—9600
• Flow Control—None
• Data—8
•
Parity—None
•
Stop Bits—1
• DCD State—Disregard
NOTE: When you use the SecureCRT client to connect to a Director device
for the initial setup of a QFabric system, the backspace key does not work.
As a workaround, use the Shift+Delete key combination in SecureCRT as a
backspace key equivalent or use a different UNIX client to support the
backspace key natively.
Copyright © 2015, Juniper Networks, Inc. 362
QFX3000-G QFabric System Deployment Guide