Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 337 / 652

role routing-engine;
serial-number abc123;
}
member 1 {
role routing-engine;
serial-number def456;
}
member 2 {
role line-card;
serial-number ghi789;
}
member 3 {
role line-card;
serial-number jkl012;
}
}
To verify the syntax of your configuration before committing it, enter
commit check
from
configuration mode. If you are done configuring the device, enter
commit
from
configuration mode.
Verification
Confirm that the Virtual Chassis configuration is working properly.
• Verifying the QFabric System Control Plane—Virtual Chassis VC0 on page 311
•
Verifying the QFabric System Control Plane—Virtual Chassis VC1 on page 319
Verifying the QFabric System Control Plane—Virtual Chassis VC0
Purpose Verify that your first Virtual Chassis is operational.
Action Connect to the Junos OS CLI of Virtual Chassis VC0, either from your management
network or from the console port of the master Virtual Chassis member. In operational
mode, enter the
show virtual-chassis status and show interfaces terse commands.
Sample Output
{master:0}
user@vc0>
show virtual-chassis status
Virtual Chassis ID: c809.2c5d.9f7b
Mastership Neighbor List
Member ID Status Serial No Model priority Role ID Interface
0 (FPC 0) Prsnt BP0210471476 ex4200-48t 128 Master* 1 vcp-1
1 (FPC 1) Prsnt BP0210460181 ex4200-48t 128 Backup 0 vcp-0
2 vcp-1
2 (FPC 2) Prsnt BP0210458724 ex4200-48t 128 Linecard 1 vcp-0
3 vcp-1
3 (FPC 3) Prsnt BP0210477189 ex4200-48t 128 Linecard 2 vcp-0
Member ID for next new member: 4 (FPC 4)
{master:0}
user@vc0>
show interfaces terse
311 Copyright © 2015, Juniper Networks, Inc.
Chapter 16: Initial Setup