Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 382 / 652

bme0.32770 up up eth-switch
bme0.32771 down up eth-switch
bme0.32772 down up eth-switch
bme0.32773 down up eth-switch
bme0.32774 down up eth-switch
bme0.32775 down up eth-switch
bme0.32776 down up eth-switch
dsc up up
gre up up
ipip up up
lo0 up up
lo0.0 up up inet 10.255.195.96 --> 0/0
iso
47.0005.80ff.f800.0000.0108.0001.0102.5519.5096
inet6 abcd::10.255.195.96
fe80::21f:120f:fc39:6d80
lsi up up
me0 up up
mtun up up
pimd up up
pime up up
tap up up
vlan up up
vme up up
vme0.0 up up inet 192.168.157.26/24
Meaning In the output of the
show virtual-chassis status
command, if all eight members appear,
the Virtual Chassis is operational.
In the output of the
show interfaces terse
command, if all interfaces that connect to the
QFabric system devices are listed as up (such as ge-0/0/0 through ge-0/0/7 for the
Node devices; ge-0/0/19, ge-1/0/19, ge-2/0/19, and ge-3/0/19 for the Interconnect
devices; ge-0/0/22, ge-0/0/23, ge-1/0/22, ge-1/0/23, ge-2/0/22, and ge-2/0/23 for the
Director devices; and xe-0/1/0, xe-1/1/0, xe-2/1/0, xe-3/1/0, xe-4/1/0, xe-5/1/0, xe-6/1/0,
and xe-7/1/0 for the inter-Virtual Chassis connections), the control plane is properly
connected.
Verifying the QFabric System Control Plane—Virtual Chassis VC1
Purpose Verify that your second Virtual Chassis is operational.
Action Connect to the Junos OS CLI of Virtual Chassis VC1, either from your management network
or from the console port of the master Virtual Chassis member. In operational mode,
enter the
show virtual-chassis status
and
show interfaces terse
commands.
Sample Output
{master:0}
user@vc1>
show virtual-chassis status
Preprovisioned Virtual Chassis
Virtual Chassis ID: c809.2c5d.9f8a
Virtual Chassis Mode: Enabled
Mstr Mixed Neighbor List
Member ID Status Serial No Model prio Role Mode ID Interface
0 (FPC 0) Prsnt BP0210471477 ex4200-24f 129 Master* N 7 vcp-0
1 vcp-1
Copyright © 2015, Juniper Networks, Inc. 356
QFX3000-G QFabric System Deployment Guide