Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 372 / 652

user@switch# set system syslog time-format millisecond
user@switch# set interfaces vme unit 0 family inet address 192.168.157.26/24
user@switch# set routing-options static route 0.0.0.0/0 next-hop 192.168.157.1
user@switch# set virtual-chassis preprovisioned
user@switch# set virtual-chassis member 0 role routing-engine
user@switch# set virtual-chassis member 0 serial-number abc123
user@switch# set virtual-chassis member 1 role routing-engine
user@switch# set virtual-chassis member 1 serial-number def456
user@switch# set virtual-chassis member 2 role line-card
user@switch# set virtual-chassis member 2 serial-number ghi789
user@switch# set virtual-chassis member 3 role line-card
user@switch# set virtual-chassis member 3 serial-number jkl012
user@switch# set virtual-chassis member 4 role line-card
user@switch# set virtual-chassis member 4 serial-number mno321
user@switch# set virtual-chassis member 5 role line-card
user@switch# set virtual-chassis member 5 serial-number pqr654
user@switch# set virtual-chassis member 6 role line-card
user@switch# set virtual-chassis member 6 serial-number stu987
user@switch# set virtual-chassis member 7 role line-card
user@switch# set virtual-chassis member 7 serial-number vwx210
Results To view the configuration, issue the
show
command in configuration mode or the
show
configuration
command in operational mode. If the output does not display the intended
configuration, repeat the configuration instructions in this example to correct it.
The following configuration is the standard configuration that applies universally to both
Virtual Chassis in your QFabric system control plane network.
groups {
qfabric {
system {
commit {
synchronize;
}
}
chassis {
redundancy {
graceful-switchover;
}
aggregated-devices {
ethernet {
device-count 10;
}
}
fpc 0 {
pic 1 {
sfpplus {
pic-mode 10g;
}
}
}
fpc 1 {
pic 1 {
sfpplus {
pic-mode 10g;
Copyright © 2015, Juniper Networks, Inc. 346
QFX3000-G QFabric System Deployment Guide