Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 249 / 652

CAUTION: The V+ terminals are shunted internally together, as are the
V- terminals. The same polarity terminal can be wired together from the
same source to provide an additional current path in a higher power
chassis. Do not connect the terminals to different sources.
Figure 56: Securing Ring Lugs to the Terminals on the QFX3500, QFX3600
or QFX3600-I DC Power Supply
g050219
8.
Replace the terminal block cover.
9.
Close the input circuit breaker.
NOTE: The device powers on as soon as power is provided to the power
supply. There is no power switch on the device.
10.
Verify that the
IN
and
OUT
LEDs on the power supply are lit green and are on steadily.
Related
Documentation
DC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device
•
•
DC Power Supply LEDs on a QFX3500, QFX3600, or QFX3600-I Device
Connecting a QFX Series Device to a Management Console
Supported Platforms
QFabric System
,
QFX3500, QFX3600
The QFX Series has a console port with an RJ-45 connector. Use the console port to
connect the device to a management console or to a console server.
Ensure that you have an RJ-45 to DB-9 rollover cable available. An RJ-45 cable with an
RJ-45 to DB-9 adapter is provided with the device.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to the QFX Series, use a
combination of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the
device and a USB to DB-9 male adapter. You must provide the USB to DB-9
male adapter.
223 Copyright © 2015, Juniper Networks, Inc.
Chapter 12: Installing a QFX3500 Node Device