Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 355 / 652

23 to Director devices. Table 84 on page 330 shows the details of the QFabric system
device-to-Virtual Chassis port mappings for a fiber-based control plane network.
Figure 82: QFX3000-G QFabric System Fiber-Based Control Plane—Virtual
Chassis Port Ranges
Node devices
Ports 0-15
Interconnect devices
Ports 18-21
Director group
Ports 22-23
Inter-VC LAG
Ports xe-x/1/0
CAUTION:
The control plane network within a QFabric system is a critical component
of the system that should not be shared with other network traffic. In order
•
to scale efficiently, the control plane network must be reserved for the
QFabric system and its components. As a result, do not use the ports of
the QFabric system control plane for any purpose other than to transport
QFabric system control plane traffic. We neither recommend nor support
the connection of other devices to the QFabric system control plane
network.
•
Do not install Junos Space and AI-Scripts (AIS) on the control plane network
Virtual Chassis in a QFX3000-G QFabric system.
NOTE: Not all port numbers are represented in Table 84 on page 330 , and
ports 16 and 17 are reserved for future uses.
329 Copyright © 2015, Juniper Networks, Inc.
Chapter 16: Initial Setup