Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 464 / 652

pic (Port)
Supported Platforms QFabric System , QFX3600
Syntax pic pic-number {
fte {
(port port-number | port-range port-range-low port-range-high);
}
xe {
(port port-number | port-range port-range-low port-range-high);
}
}
Hierarchy Level
[edit chassis interconnect-device name fpc slot]
Release Information Statement introduced in Junos OS Release 12.2 for the QFX Series.
Description (QFX3600 Node device only) Configure port types on QFX3600 Node devices.
CAUTION: The Packet Forwarding Engine on the QFX3600 Node device is
restarted when you commit the port type configuration changes. As a result,
you might experience packet loss on the Node device.
Options
pic pic-number
—Number of the physical interface card (PIC) on which you want to
configure port types. Specify 0 to configure xe (10-Gigabit Ethernet) type ports.
Specify 1 to configure fte (40-gigabit data plane uplink) type ports.
fte
—Configure a specific port or a range of ports to operate as 40-gigabit data plane
uplink ports.
xe
—Configure a specific port or a range of ports to operate as four 10-Gigabit Ethernet
ports.
port-number
—Port number on which you want to configure the port type. Valid values
are 0 through 7 if the port type is
fte
, and 2 through 15 if the port type is
xe
.
port-range-low —Lowest-numbered port in the range of ports. The lowest possible value
is 0 if the port type is fte . The lowest possible value is 2 if the port type is xe .
port-range-high
—Highest-numbered port in the range of ports. The highest possible value
is 7 if the port type is
fte
. The highest possible value is 15 if the port type is
xe
.
NOTE:
By default, ports Q0 through Q3 operate as fte type ports, and ports Q4
through Q15 operate as xe type ports.
•
•
Only ports Q0 through Q7 can be configured as fte type ports.
Copyright © 2015, Juniper Networks, Inc. 438
QFX3000-G QFabric System Deployment Guide