Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 321 / 652

Table 83: Virtual Chassis LAG Port Mappings
Member 3 Member 2 Member 1 Member 0 VC0 and VC1
xe-3/1/0 to xe-3/1/0 xe-2/1/0 to xe-2/1/0 xe-1/1/0 to xe-1/1/0 xe-0/1/0 to xe-0/1/0 Uplink port 0
xe-3/1/2 to xe-3/1/2 xe-2/1/2 to xe-2/1/2 xe-1/1/2 to xe-1/1/2 xe-0/1/2 to xe-0/1/2 Uplink port 2
Configuration
CLI Quick
Configuration
To quickly configure the QFabric system control plane Virtual Chassis, copy the following
commands, paste them in a text file, remove any line breaks, change any details necessary
to match your network configuration, and then copy and paste the commands into the
CLI at the
[edit]
hierarchy level.
NOTE: The configuration files for a QFabric system control plane network
are also available for download from the QFX Series section of the Junos OS
software download page at
https://www.juniper.net/support/downloads/junos.html
.
set groups qfabric system commit synchronize
set groups qfabric chassis redundancy graceful-switchover
set groups qfabric chassis aggregated-devices ethernet device-count 10
set groups qfabric chassis fpc 0 pic 1 sfpplus pic-mode 10g
set groups qfabric chassis fpc 1 pic 1 sfpplus pic-mode 10g
set groups qfabric chassis fpc 2 pic 1 sfpplus pic-mode 10g
set groups qfabric chassis fpc 3 pic 1 sfpplus pic-mode 10g
set groups qfabric chassis lcd-menu fpc 0 menu-item maintenance-menu disable
set groups qfabric chassis lcd-menu fpc 1 menu-item maintenance-menu disable
set groups qfabric chassis lcd-menu fpc 2 menu-item maintenance-menu disable
set groups qfabric chassis lcd-menu fpc 3 menu-item maintenance-menu disable
set groups qfabric chassis alarm management-ethernet link-down ignore
set groups qfabric protocols rstp interface ae8.0 mode point-to-point
set groups qfabric protocols rstp interface all edge
set groups qfabric protocols rstp interface all no-root-port
set groups qfabric protocols rstp bpdu-block-on-edge
set groups qfabric protocols lldp interface all
set groups qfabric class-of-service classifiers ieee-802.1 onep_qfabric_classifier
forwarding-class class_3 loss-priority low code-points 110
set groups qfabric class-of-service classifiers ieee-802.1 onep_qfabric_classifier
forwarding-class class_3 loss-priority low code-points 111
set groups qfabric class-of-service classifiers ieee-802.1 onep_qfabric_classifier
forwarding-class class_2 loss-priority low code-points 100
set groups qfabric class-of-service classifiers ieee-802.1 onep_qfabric_classifier
forwarding-class class_2 loss-priority high code-points 101
set groups qfabric class-of-service classifiers ieee-802.1 onep_qfabric_classifier
forwarding-class class_0 loss-priority low code-points 010
set groups qfabric class-of-service classifiers ieee-802.1 onep_qfabric_classifier
forwarding-class class_0 loss-priority high code-points 001
set groups qfabric class-of-service classifiers inet-precedence IP_qfabric_classifier
forwarding-class class_3 loss-priority low code-points 110
295 Copyright © 2015, Juniper Networks, Inc.
Chapter 16: Initial Setup