Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 535 / 652

set chassis display message
Supported Platforms EX Series , J Series , M Series , MX Series , PTX Series , QFabric System , QFX Series standalone
switches , T Series
List of Syntax Syntax on page 509
Syntax (TX Matrix Router) on page 509
Syntax (TX Matrix Plus Router) on page 509
Syntax (QFabric Systems) on page 509
Syntax set chassis display message "message"
<permanent>
Syntax (TX Matrix
Router)
set chassis display message "message" (lcc number | scc)
<permanent>
Syntax (TX Matrix Plus
Router)
set chassis display message “message ” (fpc-slot slot-number | lcc number | sfc number)
<permanent>
Syntax (QFabric
Systems)
set chassis display (interconnect-device | node-device) device-id message "message"
<permanent>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option for TX Matrix Plus router introduced in Junos OS Release 9.6.
Command introduced in Junos OS Release 11.1 for QFX Series standalone switches.
Command introduced in Junos OS Release 13.1 for QFabric systems.
Description Display or stop a text message on the craft interface display, which is on the front of the
router, or on the LCD panel display on the switch. The craft interface alternates the display
of text messages with standard craft interface messages three times, switching between
messages every 60 seconds.
NOTE: On T Series routers, when this command is executed with the
permanent option, the display of the text message alternates with that of the
standard craft interface message continuously every 60 seconds.
By default, on both the router and the switch, the text message is displayed for 5 minutes.
The craft interface display has four 20-character lines. The LCD panel display has two
16-character lines, and text messages appear only on the second line.
Options
" message "
—Message to display. On the craft interface display, if the message is longer
than 20 characters, it wraps onto the next line. If a word does not fit on one line, the
entire word moves down to the next line. Any portion of the message that does not
fit on the display is truncated. An empty pair of quotation marks (“ ”) deletes the
text message from the craft interface display. On the LCD panel display, the message
is limited to 16 characters.
509 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands