Johnson Controls HS2016 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 284

Johnson Controls HS2016 Скачать руководство пользователя страница 65

Add User Labels

Custom labels can be programmed for each user to more easily identify them on the alarm system.

Labels can be a maximum of 16 characters.

Using an LCD keypad:

1. Press [*][5] then select a user (02-1000).
2. On the “Press [*] for User Labels” screen, press [*].
3. Key in the custom user label. For instructions on how to input labels,

Assigning Proximity Tags

This section is used to assign proximity tags to users.

Note:

A proximity tag cannot be assigned to the master code.

Using an LCD keypad:

1. In the [*][5] menu, select a user or enter a user number.
2. Select “Press [*] for Prox Tag”, then pass the enrolled tag near the tag reader on the keypad.

A proximity tag can only be assigned to one user at a time. Invalid (un-enrolled) proximity

tags cannot be used.

Deleting a proximity tag:

To delete a proximity tag:

1. Select a user and then select Press [*] for Prox Tag.
2. Press the [*] key when prompted to delete the proximity tag.

Using an LED/ICON keypad

To use and LED/ICON keypad:

1. Press [*][5][Master/Supervisor Code].
2. Key in a 4-digit user code.
3. Key in [2].
4. Pass the enrolled tag near the tag reader on the keypad.

To increase authentication flexibility, user access can be achieved by entering a valid

user code or by swiping a proximity tag. Alternatively, users can be required to enter a

valid access code and present a proximity tag.

[040] User Authentication

Note:

A proximity tag can not be assigned to the Master code. If a user code with a

proximity tag is deleted, the proximity tag must be re-enrolled.

Assigning Users to Partitions

About this task:

Each user code must be assigned to a partition(s) in order for the user to be recognized by the

alarm system. By default, each code has the attributes of the code used to program it.

Using an LCD keypad:

1. Press [*][5][Master Code] then select a user (0002-1000). An “N” indicates they are not yet

assigned to a partition. A “Y” indicates they are assigned to a partition.

2. Scroll to the partition assignment screen then press [*].

65

PowerSeries Neo HS2016/HS2016-4/HS3032/HS2064/HS2064 E/HS2128/HS2129 E Alarm Controller Reference

Manual

«
...
63
64
65
66
67
...
»

Содержание HS2016





























































































































































































































































































Отзывы:

Нет отзывов