Ingersoll-Rand Thermo King CRR DF MPC2000, Руководство по обслуживанию

Страница: 74 / 165

Microprocessor Controller
73
9. Press ESC key to exit the Cargo Data screen.
Viewing or Setting Run Time
1. Press the F3 key to enter the Main Menu.
2. Press F2 key to scroll to “MISC. FUNCTIONS”.
3. Press F4 key to access the Misc. Functions menu. “Date Time” appears in the LCD display. Press F2
key to scroll to “RUN TIME”.
4. Press F4 key to access the Run Time screen. The Run Time screen appears with cursor in HEAT menu
line.
5. Press F3 key to scroll cursor down through cargo data list: - HEAT
• R-134a COMPRESSOR
• EVAPORATOR LOW
• CONDENSER
• SCROLL (R-23) COMPRESSOR
• TOTAL
6. To reset an hourmeter or set hours on a replacement controller:
a. Press F4 key with cursor in the desired menu line. The Password screen appears.
b. Press F2 key, “A” key (password is “A”), F4 key and then EXIT key. An Enter Arrow appears in
the hourmeter line.
c. Enter the desired run time setting (up to 5 characters).
d. When the entry is complete, press and hold the F4 key until the cursor stops flashing. The new run
time appears in the menu line.
7. Repeat steps 5 and 6 to reset additional hourmeters.
8. Press ESC key to exit the Cargo Data screen.