manualshive.com logo in svg

Ingersoll-Rand Thermo King CRR DF MPC2000, Руководство по обслуживанию

Поделиться
Скачать
Ingersoll-Rand Thermo King CRR DF MPC2000 Скачать руководство пользователя страница 69

Microprocessor Controller

68

•

ACKNOWLEDGE: An alarm code has been viewed and acknowledged in the alarm list. The Alarm 
LED remains ON but does not flash.

•

If the alarm condition is corrected, the Alarm LED will turn OFF and the alarm code disappears 
from the alarm list.

Viewing the Alarm List menu:

With the unit On/Off switch ON and the LCD display showing the standard display (setpoint):

1. Press F2 key to directly enter the Alarms menu. The first alarm code number, alarm state and alarm 

description appears in LCD display.

NOTE: Alarm codes are displayed in sequential order, not in the order of occurrence.

2. Write down the first alarm code. Then press F2 key to view the next alarm code when more than one 

alarm code has been recorded.

3. Repeat step 4 until all alarm codes have been recorded. To scroll backward to return to a previous 

alarm code, press F3 key.

4. To clear all alarm codes from the current display list and turn off the Alarm LED, all problems must 

be corrected and the alarm code “acknowledged” in the Alarm List menu. 

NOTE: To acknowledge an alarm, press F4 while the alarm code appears on the screen. The alarm 
state will change from ACTIVE or NOT ACTIVE to ACKNOWLEDGE.

NOTE: If no key is pressed for 30 seconds, the controller returns to the previous menu level or the 
LCD Standard Display.

Commands Menu

The Commands menu displays a list of tasks that can be activated. The following commands are 
available:

•

Defrost: Manual defrost can be initiated. When command is activated, LCD message display will 
show ACTIVATED, NOT ACTIVATED (evaporator temperature above 18 C [50 F]) or ALREADY 
ACTIVATED (defrost in progress).

•

PTI (Pretrip) Test: Controller automatically completes a test of individual components and checks 
unit refrigeration capacity, heating capacity, temperature control and defrost.   See “PTI (Pretrip) 
Test” in this chapter for test details.

•

Manual Function Test: Controller tests individual components selected by the technician for 
diagnosis. LCD display will show expected and actual current of the component being tested.

Viewing the Commands menu:

With the unit On/Off switch ON and the LCD display showing the standard display (setpoint):

1. Press the F3 key to enter the Main Menu.

2. Press F2 key to scroll through Main Menu until “COMMANDS” appears in LCD display.

3. Press F4 key to access the Commands menu. The first command in the submenu (Defrost) appears in 

the LCD display.

CAUTION: The PTI test should only be performed on an empty container!

Содержание Thermo King CRR DF MPC2000






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды