manualshive.com logo in svg

Ingersoll-Rand Thermo King CRR DF MPC2000, Руководство по обслуживанию

Поделиться
Скачать
Ingersoll-Rand Thermo King CRR DF MPC2000 Скачать руководство пользователя страница 70

Microprocessor Controller

69

4. Press F2 or F3 key to scroll to the desired command:

•

Defrost

•

PTI (Pretrip)

•

Manual Function Test

5. Press F4 key to activate the command selected.

•

Defrost: LCD display shows DEFROST ACTIVATED, NOT ACTIVATED (evaporator 
temperature above 18 C [50 F]) or ALREADY ACTIVATED (defrost in progress). Defrost cycle 
ends automatically.

•

PTI (Pretrip): LCD display shows PTI Test currently being performed. PTI test ends 
automatically. Press any key on the controller to return the unit to normal operation.

•

Manual Function Test:

a. Controller displays the first component that appears in the Manual Function submenu list: 

CONDENSER OFF.

b. Press F2 or F3 key to scroll to desired component test: 

•

Condenser Fan:

•

Compressor:

•

Evaporator Fan:

•

R-23 Compressor

•

Sensor Check.

•

Heat:

•

Zero Current (View value only):

•

·Sensor Check: 

•

·Sensor Check low speed (Probe Test), operates high speed evaporator fans only. After 5 
minutes check the temperatures of the left and right hand supply sensors, return sensor and 
defrost sensor. Temperatures should be approximately equal.

c. Component Test:

•

Press F4 key to start the component test. LCD display will change the component state from 
OFF to ON and show expected current and actual current on phase 1, 2 and 3.

•

Press F4 key again to stop test. LCD display will change component state from ON to OFF.

d. System Test (Multiple Components): More than one component can be turned ON at a time to 

perform a functional test of the unit.

•

Press F4 key to start the component. LCD display shows component ON.

•

Press F3 key to scroll to select next component. Press F4 to start the component. LCD display 
shows component ON.

Содержание Thermo King CRR DF MPC2000






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды