NOTE
If the range of VLANs to which AIS packets are to be sent is set, setting the interval at which AIS
packets are sent to 60s is recommended.
8.
Run:
ais level
level-value
The level of AIS packets to be sent is set.
9.
Run:
ais vlan
{
pe-vid
pe-vid
ce-vid
{
low-ce-vid
[
to
hig-ce-vid
] } &<1-10> |
vid
{
low-vid
[
to
high-vid
] } &<1-10> }
mep
mep-id
The range of VLANs to which AIS packets are to be sent is set.
Step 2
Perform the following steps on a CE:
1.
Run:
system-view
The system view is displayed.
2.
Run:
cfm md
md-name
The MD view is displayed.
3.
Run:
ma
ma-name
The MA view is displayed.
4.
Run:
map vlan
vlan-id
The MA is bound to the current VLAN.
5.
Run:
ais enable
AIS is enabled for the current MA.
By default, AIS is disabled from an MA.
6.
Run:
ais suppress-alarm
Alarm suppression is enabled for the current MA.
By default, alarm suppression is disabled from a MEP.
In an MD nesting scenario, if alarm suppression is enabled for the MD of a high level, a
MEP in this MD does not send alarms that a MEP in an MD of a low level has sent to the
NMS after receiving an AIS packet.
7.
Run:
mep alarm disable
Disables the alarm reporting function of a specific alarm indication signal (AIS).
By default, the alarm reporting function is enabled.
----End
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
8 Ethernet OAM Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
795