undo peer-backup enable
RUI backup is disabled for users getting online from a specified domain.
NOTE
In the view of an AAA domain where users have logged in, neither the
peer-backup enable
command nor
the
undo peer-backup enable
command can be used.
----End
11.5.3 Setting NAS Parameters
By setting NAS parameters, you can ensure that the master and backup servers send the same
information to the remote server.
Context
To enable users to log in through the slave device without twice authentication, do as follows
on the devices that back up each other:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
remote-backup-profile
profile-name
The remote backup profile view is displayed.
Step 3
Run:
service-type
bras
The RBS of the BRAS user information is enabled.
Step 4
Run:
nas
{
logic-ip
ip-address
|
logic-port
interface-name
|
logic-sysname
host-name
}
The logic IP address, logic interface, and logic host name are configured. Ensure that the devices
that back up each other send the same information about NAS-IP-Address, NAS-Port, and
Option 82 contained in the packets to the RADIUS and DHCP servers.
----End
11.5.4 Setting the Interval for Backing Up Traffic or the Traffic
Threshold
If the intervals and traffic volume threshold are both set to 0, user traffic is not backed up.
Context
To ensure that the user traffic can be backed up in real time, do as follows on the devices that
back up each other:
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
11 Multi-node Backup Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1163
