CFM is enabled globally.
b.
Select either of the following views:
To enter the MD view and enable CFM globally, run:
cfm md
md-name
To enter the default MD view, run:
cfm default md
[
level
level
]
c.
Run:
mip create-type
{
default
|
explicit
|
none
}
A MIP generation rule in accordance with IEEE Standard 802.1ag-2007 is
configured in a specific MD.
l
Configure a MIP generation rule in accordance with IEEE Standard 802.1ag-2007 in
the MA view.
a.
Run:
cfm md
md-name
The MD view is displayed.
Run:
ma
ma-name
The MA view is displayed.
b.
Run:
mip create-type
{
default
|
explicit
|
none
|
defer
}
A MIP generation rule in accordance with IEEE Standard 802.1ag-2007 is
configured in a specific MA.
----End
Enabling CC Detection
With continuity check (CC) detection, Ethernet CFM can periodically send CCMs between
MEPs to monitor connectivity between MEPs.
Context
Do not configure a MEP or an RMEP before configuring this function.
Perform the following steps on the edge devices on which MEPs reside within MAs:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
cfm md
md-name
The MD view is displayed.
Step 3
Run:
senderid-tlv-type
{
chassis
|
chassis-manage
|
defer
|
manage
|
none
}
The Sender ID TLV is configured.
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
8 Ethernet OAM Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
481
