![Huawei Quidway NetEngine40E Скачать руководство пользователя страница 803](http://html.mh-extra.com/html/huawei/quidway-netengine40e/quidway-netengine40e_configuration-manual-reliability_169453803.webp)
g.
Run:
remote-mep mep-id
mep-id
The RMEP is configured.
h.
Run:
mep ccm-send enable
The CCM transmission function is enabled.
ETH OAM
i.
Run:
remote-mep ccm-receive
[
mep-id
mep-id
]
enable
The CCM reception function is enabled.
2.
On the receiving device on a PW where proactive two-way frame delay measurement
will be implemented, run:
Table 8-63
Enabling the DMM frame reception function
Scenario
Procedure
Point-to-
point
scenario
Performance statistics collection not based on a test instance:
Run:
delay-measure two-way receive
mep
mep-id
peer-ip
peer-ip
[
vc-id
vc-id
]
The DMM reception function is configured on the device.
Performance statistics collection based on a specified test instance:
1. Run:
test-id
test-id
A test instance is configured.
2. Run:
delay-measure two-way receive
test-id
test-id
The DMM reception function is configured on the device.
Point-to-
multipoint
scenario
1. Run:
test-id
test-id
A test instance is configured.
2. Run:
delay-measure two-way receive
test-id
test-id
The DMM reception function is configured on the device.
3.
On the transmitting device on a PW where proactive two-way frame delay
measurement will be implemented, run:
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
8 Ethernet OAM Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
786