An ME instance is configured.
----End
9.5.3 Configuring LB on an L2+L3 Network
LB detects the end-to-end connectivity of L2+L3 networks.
Context
LB can monitor the connectivity between two MEPs or between a MEP and a MIP. Unlike CC
and CV, which are performed periodically, LB is performed at a specified time.
Procedure
l
Run the following command on the L2VPN/L3VPN-side MEP:
ping ip-meg
meg-name
peer-ip
peer-ip-addr
[
-mode
{
no-reply
|
reply
} |
-
count
count-value
|
-exp
exp-value
|
-interval
interval-value
|
-packet-size
size-value
|
-timeout
timeout
|
-ttl
ttl-number
]
*
LB is configured.
NOTE
If the network speed is too slow, set a larger value for
timeout-value
, which specifies the period to wait
for a Reply packet.
----End
9.5.4 Configuring LT on an L2+L3 Network
LT helps locate node or link faults on L2+L3 networks.
Context
An LT test obtains information about each node on a path between a MEP and a MIP or between
MEPs. The information obtained can be used to locate node or link faults.
Procedure
l
Run the following command on the L2VPN/L3VPN-side MEP:
tracert ip-meg
meg-name
peer-ip
peer-ip
[
-exp
exp-velue
| -
mode
{
no-reply
|
reply
} |
-packet-size
packet-size
|
-timeout
timeout
|
-ttl
ttl
]
*
LT is configured.
NOTE
If the network speed is too slow, set a larger value for
timeout-value
, which specifies the period to wait
for a Reply packet.
----End
9.5.5 Checking the Configurations
After MPLS-TP OAM is configured on an L2+L3 network, check performance statistics.
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
9 MPLS-TP OAM Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
954
