HP ProCurve 2610-24, Руководство по управлению и настройке

Страница: 60 / 464

Using the Command Line Interface (CLI)
Using the CLI
Changing Interfaces. If you change from the CLI to the menu interface, or
the reverse, you will remain at the same privilege level. For example, entering
the
menu command from the Operator level of the CLI takes you to the
Operator privilege level in the menu interface.
Table 4-1. Privilege Level Hierarchy
Privilege
Level Example of Prompt and Permitted Operations
Operator Privilege
Operator
ProCurve>
show < command >
View status and configuration
Level setup
information.
ping < argument >
Perform connectivity tests.
link-test < argument >
enable
Move from the Operator level to the
Manager level.
menu Move from the CLI interface to the menu
interface.
logout
Exit from the CLI interface and terminate
the console session.
exit
Terminate the current session (same as
logout).
Manager Privilege
Manager
ProCurve#
Perform system-level actions such as system control, monitoring,
Level
and diagnostic commands, plus any of the Operator-level
commands. For a list of available commands, enter
?
at the
prompt.
Global
ProCurve(config)#
Execute configuration commands, plus all Operator and Manager
Configuration commands. For a list of available commands, enter ? at the
Level prompt.
Context
ProCurve(eth-5)#
Execute context-specific configuration commands, such as a
Configuration ProCurve(vlan-100)#
particular VLAN or switch port. This is useful for shortening the
Level
command strings you type, and for entering a series of commands
for the same context. For a list of available commands, enter
?
at
the prompt.
4-6