Hitachi U-5100, Инструкция по эксплуатации

Страница: 193 / 330

3.3.4
(2) The 6-cell condition (6 Cell) screen (Fig. 3-85)
appears. To set each item on the 6-cell condition (6
Cell) screen, press the [ENTER] key. Or use the [
▲ ]
or [ ▼ ] key. Select “Manual” for 6 Cell Mode and
specify the number of samples to be measured for No.
of Sample. For details of each parameter, refer to
Table 3-50.
WL Scan CELL A
1 Meas.PARAM. 6 Cell Mode Auto
2 Sample No.of Sample 1
3 6 Cell
4 System
5 Peak PARAM.
6 Print
7 Save Method
8 Meas.Screen
Input character. :
Sample Name [Max: 8 characters]
Fig. 3-85 6-cell Condition (6 Cell) Screen
Table 3-50 “6 Cell” Setting Parameter
Setting Item Description
6 Cell Mode Select a 6-cell operation mode for
measurement from the following.
1) Auto
By setting a baseline sample and
unknown sample to the 6-cell holder, it
is possible to automatically turn the 6-
cell holder and automatically measure
one sample after baseline correction.
(For details of the Auto mode, refer to
section 3.2.4..)
2) Manual
Baseline correction and sample
measurement are performed manually.
It is required to manually move the cells
and execute baseline correction.
5.
Setting of System Conditions
6.
Setting of Peak Detection Conditions
*
7.
Setting of Printing Conditions
8.
Saving of Measuring Conditions
* For steps 5 to 8, refer to section 3.2.4..
3 - 129