Hitachi U-5100, Инструкция по эксплуатации

Страница: 108 / 330

3.2 Automatic Continuous Measurement (6-cell auto mode)
3 - 44
Photometry CELL A
1 Meas.PARAM. Sample Name
2 Sample Sample ID 1
3 6 Cell
4 Print
5 Save Method
6 Meas.Screen
Input character. ： ＿
Sample Name [Max: 8 characters]
Fig. 3-25 Sample Condition (Sample) Screen
(3) To enter/select the sample conditions, press the
[ENTER] key. Or select each item with the [ ▲ ] or [ ▼ ]
key and make your setting. For details of each
parameter, refer to Table 3-20.
(4) After setting the sample name (Sample Name) and
sample number (Sample ID), return to the Photometry
screen by pressing the [RETURN] key or [
◄ ] key.
Table 3-20 “Sample” Setting Parameters
Setting Item Description
Sample
Name
Up to 8 half-size alphanumeric characters can be
entered for the sample name. The sample name
entered here is printed in the sample name field on
the report. For the character input procedure, refer
to section 2.4.3.
Sample ID Set the first number to be assigned for sample
numbering.
This parameter is settable in a range of 1 to 9999.
If “9999” is specified for Sample ID, the samples are
numbered 9999
→
1
→
2 ....
4.
Setting of 6-cell Conditions
NOTE
: “6 Cell Mode” is not indicated if OFF is specified
for Mode on the 6-cell mode setting screen for
use of the single cell holder or rectangular long
path cell holder. (For details, refer to section
2.5.4..) When the auto sipper is connected,
“Sipper” is indicated in place of “6 Cell Mode”.