manualshive.com logo in svg

Hioki RM3542, Инструкция по эксплуатации, Страница: 83 / 218

Поделиться
Скачать
Hioki RM3542 Скачать руководство пользователя страница 83

6.4  Auto-Exporting Measured Values (at End of Measurement) (Data Output Function)

77

6

At the end of measurement, the measured value is exported to a computer via RS-232C.

See:

"Chapter 9 Communications (RS-232C/ GP-IB Interface)" (p. 97)

6.4

Auto-Exporting Measured Values (at End of 
Measurement) (Data Output Function)

• Set the interface to [RS232C] beforehand. This function is not applicable to the GP-IB Interface. 

See:

"9.4 Configuring the Communications Protocol" (p. 101)

• When internal (INT) triggering is selected, data is exported only when a TRIG signal is applied.
• Executing a 

:READ?

 query command exports duplicate measured values.

• For other queries, be careful to avoid overlapping query response timing with auto-exporting measured val-

ues. 

• The data format for measured values can be selected as ASCII (default) or BINARY. Transfer time is mini-

mized when BINARY is selected. 

See:

":SYSTem:FORMat <ASCii/ BINary>" (p. 137)

1

Open the Basic Settings screen.

2

Open the Data Memory Settings screen.

3

Enable or disable auto-exporting (DATA OUT)

4

Return to the Measurement screen.

The Basic Settings screen appears.

The Data Settings screen appears.
[DATA SETTINGS]

1

Selection

2

Selection

1

2

Disable auto-exporting (default)

Enable auto-exporting

The confirmation screen appears.

Return to the setting screen.

Save setting and return to
previous screen.

Discard setting and return to
previous screen.

Содержание RM3542



























































































































































































































Отзывы:

Нет отзывов