manualshive.com logo in svg

Hioki RM3542, Инструкция по эксплуатации, Страница: 147 / 218

Поделиться
Скачать
Hioki RM3542 Скачать руководство пользователя страница 147

9.7  Message Reference

141

9

Time to receive measured values is different for the 

:FETCh?

 and

:READ?

 commands.

See:

"9.8 Data Exporting Methods" (p. 148)

Reading the Most Recent Measurement

Syntax

Query

:FETCh?

Description

Reads the most recent measurement. No trigger occurs.

See:

"Measurement Value Formats" (p. 140)

Example

:FETC?

 1023.579E-3

Note

Binary data is returned when the Binary sending format is selected.

Measuring (Awaiting Triggers and Reading Measurements)

Syntax

Query

:READ?

Description

Switches from the Idle State to the Trigger Wait State, then reads the next measured value. With 
auto-ranging enabled, the most suitable range is selected before measurement.

See:

"Measurement Value Formats" (p. 140)

Error

•

This command causes an execution error if issued during the Continuous Measurement state
(after :INITIATE:CONTINUOUS ON).

•

This command causes an execution error if issued during the Trigger Wait State.

Note

•

The next command does not execute until measurement is finished.

•

When using an external trigger source (EXT) with auto-sending of measured values (Auto-
Memory function) enabled, returned measured values will be duplicated. Therefore, disable the
Auto-Memory function when triggering externally.

See:

"6.4 Auto-Exporting Measured Values (at End of Measurement) (Data Output Function)" (p.
77)

•

Binary data is returned when the Binary sending format is selected.

Trigger Source Operation

IMMediate

Triggers and reads measured value.

EXTernal

Triggers by TRIG signal (EXT I/O) input, and continuously reads 
measured values. 

Содержание RM3542



























































































































































































































Отзывы:

Нет отзывов