manualshive.com logo in svg

Hioki RM3542, Инструкция по эксплуатации, Страница: 13 / 218

Поделиться
Скачать
Hioki RM3542 Скачать руководство пользователя страница 13

Operating Precautions

7

Follow these precautions to ensure safe operation and to obtain the full benefits of the various
functions.

• Before using the instrument for the first time, verify that it operates normally to ensure that

no damage occurred during storage or shipping. If you find any damage, contact your
dealer or Hioki representative.

• Before using the instrument make sure that the insulation on the power cord is undamaged

and that no bare conductors are improperly exposed. Using the instrument in such condi-
tions could cause an electric shock, so contact your dealer or Hioki representative for
repair.

• Before using the instrument, make sure that the insulation on the measurement cables is

undamaged and that no bare metal is improperly exposed. If there is any damage, mea-
sured values may be unstable and measurement errors may occur.

Storage temperature and humidity: -10

°

C to 50

°

C at 80% RH or less (non-condensating)

Operating temperature and humidity: 0 to 40

°C

 at 80% RH or less (non-condensating)

Installation Precautions

• The instrument should be operated only with the bottom downwards.
• Do not place the instrument on an unstable or slanted surface.

Operating Precautions

Preliminary Checks

Instrument Installation

Avoid the following locations that could cause an accident or damage to the instrument.

Exposed to direct sunlight
Exposed to high tempera-
ture

In the presence of corrosive or ex-
plosive gases

Exposed to liquids
Exposed to high humidity 
or condensation

Exposed to strong electromag-
netic fields
Near electromagnetic radiators

Exposed to high levels of 
particulate dust

Near induction heating systems
(e.g., high-frequency induction 
heating systems and IH cooking 
utensils)

Subject to vibration

The instrument can be used with the stand (p. 16).
It can also be rack-mounted. (p. A8).

50 mm or more

10 mm or more

Rear

50 mm or more

Unplugging the power cord
kills power to the instrument.
Be sure to provide enough
unobstructed space to unplug
the power cord immediately
in an emergency. 

Содержание RM3542



























































































































































































































Отзывы:

Нет отзывов