manualshive.com logo in svg

Hioki RM3542, Инструкция по эксплуатации, Страница: 31 / 218

Поделиться
Скачать
Hioki RM3542 Скачать руководство пользователя страница 31

2.3  Turning the Power On and Off

25

2

Turning Power On

When the power is turned on, the same setting as when the power was last turned off
appears (backup function). 
When powered up for the first time, the default settings appear.

See:

"Default Settings" (p.68)

Before Starting Measurement

To obtain precise measurements, provide about 30 minutes warm-up after turning power on.
Measurement settings are recalled from when the power was previously turned off (settings
backup). 
However, measurement settings made through the RS-232C or GP-IB interface are not
retained, although they can be stored using the 

:SYSTem:BACKup

 command (p. 135).

Turning Power Off

Press the 

POWER

 button (it lights red when the instrument is off).

Disconnect the power cord from the outlet to extinguish the 

POWER

 button light.

When power is turned on again, operation resumes with the same settings as when last
turned off.

2.3

Turning the Power On and Off

Press the 

POWER

 button (it lights green).

Self-test

Indicates an error (p. 181).

After Power-On

A self-test (instrument diagnostic routine) is performed. 
During the self-test, the following information is displayed while the hardware is verified.

Error

No Errors

Normal display (measurement screen)

The following information is displayed during self-testing:

•

Manufacturer and model name

•

Firmware versions (main, and measurement)

•

Communication setting

•

Line frequency setting

If a power outage (e.g., breaker trip) occurs when the instrument is on, it will automatically
turn on again when power is restored (without pressing the 

POWER

 button).

Содержание RM3542



























































































































































































































Отзывы:

Нет отзывов