Hioki RM3542 Скачать руководство пользователя страница 12

Страница: 12 / 218

Safety Information

Accuracy

We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt. (digit) values, with the following mean-
ings.

Other Symbols

Indicates the prohibited action.

(p. )

Indicates the location of reference information.

Indicates that descriptive information is provided below.

[ ]

Square brackets indicate instrument display labels (such as setting item names).

SET

(Bold characters)

Bold characters within the text indicate operating key labels.

Unless otherwise specified, “Windows” represents Windows 95, 98, Me, Widows NT4.0, Windows 2000,
Windows XP, or Windows Vista.

Click: Press and quickly release the left button of the mouse.
Double click: Quickly click the left button of the mouse twice.

f.s.

(maximum display value)
The maximum displayable value. This is usually the name of the currently selected range.

rdg.

(reading or displayed value)
The value currently being measured and indicated on the measuring instrument.

dgt.

(resolution)
The smallest displayable unit on a digital measuring instrument, i.e., the input value that causes the
digital display to show a “1” as the least-significant digit.

Содержание RM3542



























































































































































































































Результаты поиска

Содержание RM3542

Отзывы:

Hioki RM3542, Инструкция по эксплуатации, Страница: 12 / 218

Результаты поиска

Содержание RM3542

Отзывы: