Chapter 10 Unit Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved.
287
Ellipse 3000 Release 3.0, Rev. B
SNMP Traps Sub-Menu
10.4.2.1
Set Destination IP
The
Destination IP
parameter defines the new trap-host entry by a new IP address.
To set the
Destination IP
parameter on the front panel:
❖
Navigate
Root > Configuration > Unit > SNMP Traps > Add Entry > Destination IP
.
The available value is of IP address type: xxx.xxx.xxx.xxx.
10.4.2.2
Add Entry
The
Add Entry
option allows creating a new entry in the Traps Destinations list. The new entry,
meaning host, is defined with the selected Destination IP address (see the previous section). This
option executes the Add Entry command, not leading to a new screen.
Once the new entry is displayed in the list, the user can access the Trap configuration menu and
set its other parameters (name, UDP port, and community).
To execute the
Add Entry
parameter, on the front panel:
❖
Navigate
Root > Configuration > Unit > SNMP Traps > Add Entry > Add Entry
.
10.4.3
Drop Entry Menu (front panel)
The
Drop Entry
menu allows deleting existing entries, meaning trap hosts, from the Traps
Destinations list.
To access the
Drop Entry
menu on the front panel:
❖
Navigate
Root > Configuration > Unit > SNMP Traps > Drop Entry
.
Destination IP
010.251.251.010
Drop Entry
1 Select Entry To Drop
New Host
2 Drop
