manualshive.com logo in svg

Harmonic Ellipse 3000, Руководство пользователя, Страница: 140 / 403

Поделиться
Скачать
Harmonic Ellipse 3000 Скачать руководство пользователя страница 140

Chapter 6 Audio Configuration

 © 2013 Harmonic Inc. Harmonic All rights reserved.

140

Ellipse 3000 Release 3.0, Rev. B

Audio General Menu

6.2.2

Source

The Source parameter sets the type of audio encoding source.

The source can be:

■

N/A

■

Analog

■

Digital

■

Embedded 

According to the hardware scheme of audio channels, dependencies exist between the sources of 
each audio channel pair (Channels 1 and 2, Channels 3 and 4, and so on). 

Setting up the odd channel in the pair, defines the options available for the even channel:

Setting up the even channel in the pair, defines the options available for the odd channel:

NOTE:  

The Embedded source is currently supported only for SDI video interface and is displayed as Not 

Available for a CV video interface. However, even when setting the source to Not Available, the DSP refers to it 
as an embedded source.
Channel 1/2 Digital – Channel 2/1 Analog is the only not allowed audio channel pair combo.
Even channels (Channels 2, 4, 6, and 8) can never receive an analog source.

The available options are:

■

Analog

■

Digital (Default Option)

■

Embedded (for SDI card)

■

NA – Not available

Odd Channel Set-Up

Even Channel Options

Set to: Analog

Embedded

Set to: Embedded

Digital or Embedded

Set to: Digital

Digital or Embedded

Even Channel Set-Up

Odd Channel Options

Digital

Digital or Embedded

Embedded

Analog, Digital or Embedded

Содержание Ellipse 3000




















































































































































































































































































































































































































Отзывы:

Нет отзывов