GE Voluson Swift Скачать руководство пользователя страница 266

Страница: 266 / 344

STORE / STORE3D

Figure 11-17 STORE / STORE3D View

Edit the Store - Settings as needed.

Send sequ.

•

Send sequ. is checked and

○

the

Scan Assistant is activated :

The sequentially “send order” of the images (first, second …) is derived

from the check item order as configured in the setup page (first item,

second item …).
If more than one image is available on a check item the send order is

defined by the store - date (first stored, second stored …).

If more than one checklist is available: order as configured in the setup

page

If more than one checklist group is available: order as configured in the

setup page

Images stored without check item: send order: date, after the checklist

items

○

If the

Scan Assistant is deactivated it causes all data to be sent to this

server sequentially. This means that only one transfer is active to this server

at a time. If one transfer fails, all subsequent transfers are stopped until the

failed transfer succeeds or is removed from the queue. (Use for servers that

cannot handle multiple associations, or do not sort the images by Image

Number.)

•

Send sequ. is not checked, up to 5 data sets can be transferred at the same

time. This means that transfer is faster. Images can arrive out of order in this

case. (Use for servers that have none of the limitations listed in the above

paragraph).

4D View default

Loads the default settings for 4DView. The destination information must be entered

manually.

DICOM Station default

Loads the default settings for DICOM Station. The destination information must be

entered manually.

ViewPoint Default

Loads the default settings for ViewPoint.

Options

If options are checked, the system sends the data including DICOM tags.

(ViewName and ViewNumber, TransducerData, PixelSpacing)

System Setup

11-28

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use

5831612-100 Revision 4

Содержание Voluson Swift

























































































































































































































































































































































Результаты поиска

Содержание Voluson Swift

Отзывы:

Похожие инструкции для Voluson Swift

Бренды по названию

Популярные бренды

GE Voluson Swift, Инструкция по эксплуатации

Результаты поиска

Содержание Voluson Swift

Отзывы:

Похожие инструкции для Voluson Swift

Бренды по названию

Популярные бренды