GE Voluson Swift Скачать руководство пользователя страница 206

Страница: 206 / 344

Export from the clipboard

Press

Export

to mark an image for export onto an external device (multiple selections are

possible) or for sending by email (if configured). The export index appears in the lower,

lefet hand corner of the image.

The export dialog will appear after pressing the

[start to Export]

button on the top bar or

exit the Exam Review mode.

For more information see

'Export'

on page 9-8.

Note

The export index mark will be deleted after ending the exam or completing the export.

Move clipboard images

With the Move function the order of the clipboard thumbnails (with all their image markers) can

be changed. This function is only available when more than one image exists.
1.

Long Press on the clipboard icon to activate ability to move and reorder images.

Use the cursor to move the selected image to any position on the clipboard.

2.1.

Press Cancel to stop moving the image.

2.2.

Press Insert to move the image to the selected position.

Note

If any blank slots are in between, the inserted image will be automatically placed behind the

last clipboard image.

Delete from the clipboard

Select the desired image on the clipboard and press

Delete

to mark for deletion. The deletion

mark, a red cross, apprears across the image.

Note

The image(s) will be deleted after ending the exam. There will be no confirmation dialog.

9.5.3 Saving Files to Archive

In Standard Configuration, the images and cines on the clipboard are automatically saved to

Archive upon ending an exam.

9.5.4 Image markers

The thumbnails at the clipboard have different image markers.

Cine display

Through Access Cine

Symbol

Turquoise bar with red marker.

Bitmap Cine Symbol

•

White triangle: Rot. Cine (Render Image)

•

Yellow triangle: Trans. Cine (Render Image)

•

Green triangle: Trans. Cine (Slice Image)

Export

Green arrow on the bottom left corner of the image.
If the export process has not yet been performed, the marker appears.
If the image has already been exported, the marker disappears.

Delete

Images marked for deletion have a red cross across the image.

Reload

Reloaded images have a green frame around the image.

Move

Images marked to move have a red frame around the image.

Added to worksheet

When an image is added to the worksheet with a Px-button the image has a green check

mark.

Tool tip

While the cursor is positioned over a clipboard-image, the acquisition mode of this image

is shown.

Archive

9-22

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use

5831612-100 Revision 4

Содержание Voluson Swift

























































































































































































































































































































































Результаты поиска

Содержание Voluson Swift

Отзывы:

Похожие инструкции для Voluson Swift

Бренды по названию

Популярные бренды

GE Voluson Swift, Инструкция по эксплуатации

Результаты поиска

Содержание Voluson Swift

Отзывы:

Похожие инструкции для Voluson Swift

Бренды по названию

Популярные бренды