Hide Pat. Info
Hides the patient information in the Patient Header.
Start Exam
Start an exam.
Entering and changing data
1.
Select an input field with the trackball or a touch gesture. Press
Set
or touch to position
the cursor.
2.
Enter patient/exam application information.
3.
Press
Enter
or the direction key on the key board to go to the next input field.
4.
Before leaving the menu a dialog appears asking whether to save any changes. Press
Yes
to save the changes or
No
to leave without saving the changes.
Using Worklist
1.
Press
Worklist
to enter the Worklist search dialog.
2.
Enter the desired search criteria:
•
Search Key (Patient Name or Patient ID)
•
Accession #
•
Start Date
•
End Date
•
Procedure ID
•
Station Name
•
Station AE Title
3.
Press
Search
to start the search on the currently active worklist server.
4.
Use the
Select
button to close the Worklist dialog. All received Worklist entries are
inserted into the Patient ID menu.
5.
Press
Start Exam
to close the Worklist dialog. An exam is started with all received
Worklist entries without showing in the Patient ID menu.
Searching for patients
To search for single patients define the desired search criteria and press
Search
. Close the
Search Results by touching the Cancel button on the screen.
Close the Patient Menu by pressing the cross mark button on the top-left corner part of the
screen or the Exit hard key.
9.4.1 Reopen Exams
If this button is pressed, the selected exam, which must not be older than 24 hours, is
reopened. This is only possible without a current exam being open. The reopened exam is
now the current exam and can be closed by pressing the [Tap here to end Exam] button or the
Exit hard key.
It is possible to add images like in a normal opened exam, e.g.:
•
Reload a set, change it (rotate, color) and save it again.
•
Create a new acquisition (2D, 3D, 4D,...) and save it.
Archive
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
9-19
Содержание Voluson Swift
Страница 343: ......
