GE Healthcare Brivo XR118, Руководство по обслуживанию

Страница: 204 / 318

GE H
EALTHCARE
D
IRECTION
5461425-8EN, R
EVISION
6 B
RIVO
XR118 S
ERVICE
M
ANUAL
Page 204 Section 2.0 - Software Issues
9.) Switch to terminal window opened previously with shortcut ‘shift+alt+ESC’ and list new patient
entiry just queired with command ‘ls’
e.g
10.) Copy this file to /tmp folder with command ‘cp file_name /tmp’
e.g
11.) Enter /magichome/sdc/nuevo/bin/test folder(with command ‘cd /magichome/sdc/nuevo/bin/
test) and execute below commands one by one.
i.) su – xruser
ii.) csh
iii.) source /magichome/sdc/.cshrc
iv.) run command like bellows:
v.) ./dmfParseDicomFile /tmp/name_of_patient_entry -printit
Note: name_of_patient_entry is the file coped to /tmp on step 9.
12.) Value of each DICOM tag will be printed for patient entry queried from RIS, then we need to
check the if required DICOM tag is NOT printed.
• RIS does not pass this tag & it’s value to iDR, need to request RIS side to check
e.g
2.2.6 No RIS Query Result Issue
Problem
:
Can’t get any patient query result in IDR, and no error message displays.
Route Cause:
For Default worklist query, IDR’s query send a filter Pat_Local_Id=’*’ to RIS, here * is wildcard
character which means patient local ID could be anything. If RIS mistake to view patient local ID *
as ASCII code of *, no query result could be got in IDR. Need RIS side update RIS SW.
Solution
: