GE Healthcare Brivo XR118, Руководство по обслуживанию

Страница: 112 / 318

GE H
EALTHCARE
D
IRECTION
5461425-8EN, R
EVISION
6 B
RIVO
XR118 S
ERVICE
M
ANUAL
Page 112 Section 9.0 - System Configuration
9.12 Adding a Bar Code Reader
9.12.1 Configuration
The following sections provide instructions on the most common configuration choices. A User’s
Guide is supplied with the bar code reader. Please refer to the User’s Guide for additional
programming choices.
Make sure the correct keyboard is connected and configured before adding the Bar Code Reader.
9.12.2 Setting Factory Defaults
If it is necessary to program the bar code reader back to the factory default state, use the bar code
reader to scan the following bar code:
9.12.3 Keyboard Country
Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from the
end of this document, then the Save bar code to program the keyboard for your country. As a
general rule, the following characters are not supported by the scanner for countries other than the
United States:
@ | $ # { } [ ] = / ‘ \ < > ~.