GE Healthcare Brivo XR118, Руководство по обслуживанию

Страница: 82 / 318

GE H
EALTHCARE
D
IRECTION
5461425-8EN, R
EVISION
6 B
RIVO
XR118 S
ERVICE
M
ANUAL
Page 82 Section 9.0 - System Configuration
9.7 User Accounts
9.7.1 System Log-in
Upon system start-up, you must enter an username and password to enable the full functionality of
the system. When the log in pop-up window is displayed, use the keyboard to enter your username
and password. If you make a mistake, you will be notified to re-enter.
Once logged in, you will have full access to system features and operation you are entitled to by
permissions.
9.7.2 About User Accounts
Additional user accounts can be created to restrict access to system operation and data. Three
account types are supported by this system: Radiologist, Admin/Service. When creating a user ID,
you must choose one of these two account types.
Radiologist - Users with these privileges are allowed access to all system features and operation.
Admin/Service - Gives complete control over protocols and user accounts. The Admin/Service
account includes all of the privileges defined for a typical Radiologist account. The difference is that
the Admin/Service account can also create and maintain user accounts.
root - Can only create user accounts.
User accounts must be created after system installation or whenever system software is installed
or re-installed.
9.7.3 Default User Accounts
When system software is installed, two user IDs are automatically created: Radiologist and Service.
The user ID “xruser” is assigned Radiologist privileges. User ID “insite” is assigned Admin/Service
privileges. These accounts cannot be deleted.
Log into the Digital system with User ID “******”, using the password “******”, for Admin/Service
privileges.
9.7.4 Create New Accounts
You can also create new accounts for users.
For the detailed information about how to create new accounts, please refer to operator manual.