GE Healthcare Brivo XR118, Руководство по обслуживанию

Страница: 89 / 318

GE H
EALTHCARE
D
IRECTION
5461425-8EN, R
EVISION
6 B
RIVO
XR118 S
ERVICE
M
ANUAL
Chapter 5 - - Installation & Configuration Page 89
For accurate image sizing, a custom layout must be configured by printer vendor/manufacture. In
addition to the above layouts, the following layouts must be installed by the authorized AGFA print
representative:
Table 12-14 Print Layouts
Film
Sizes 8 x 10in Pixel Width = 2388 Pixel Height = 2972 AGFA Layout - Portrait
9006
10 x 12in Pixel Width = Pixel Height =
10 x 14in Pixel Width = Pixel Height =
11 x 14in Pixel Width = 3300 Pixel Height = 4256 AGFA Layout -Portrait
9014
14 x 14in Pixel Width = Pixel Height =
14 x 17in Pixel Width = 4256 Pixel Height = 5174 AGFA Layout -Portrait
2411
24 x 24cm Pixel Width = Pixel Height =
24 x 30cm Pixel Width = Pixel Height =
General Comments:
- Supports Clear and Blue Film. If medium selected (Clear, Paper) does not match the printer, the job will be
queued until the correct film is loaded.
- AGFA layouts are specific to maximum printable area layouts. Please consult the AGFA technical
representative to install custom layouts
- Only 14x17 film was tested with this printer.
- Trim is not supported by this printer
Note:
Avoid print job failures by having printer vendor ensure that the Confirmation Level (DICOM Connectivity) at the printer
is set to (accept all). Failure to set this level on the printer will result in failed print jobs
TAB Attribute Value Comments
∅
FILM SIZE FORMAT P/L AGFA LAYOUT
14 x 17 1:1 P 2411
14 x 17 1:2 P 9001
14 x 17 2:1 P 9000
14 x 17 2:2 P 9002
14 x 17 1:1 L 2511
14 x 17 1:2 L 9003
14 x 17 2:1 L 9004
14 x 17 2:2 L 9005