GCC Technologies Elite XL 20ppm, Руководство пользователя

Страница: 74 / 216

4 - 16 • Using Windows 95
If you have to change the printer memory size, click on VMOption and select the
correct memory size from the drop-down list box. Answer Yes to the question about
available printer memory. Also, see the following section on upgrading printer
memory.
Updating printer memory
If you install additional memory in your printer, you must update the printer driver.
You do this by adjusting the Available printer memory setting at the top of the
Device Options page. When the Available printer memory figure is correct, your
computer will send files that print faster.
If you routinely download more than one or two fonts to the printer’s memory, you
should also update your Available printer memory, even if you have not added any
extra memory to the printer. Download your normal font set and then update the
memory.
If you want to update the printer driver, you first have to copy a file to the printer,
using a DOS window (do not use Windows 95’s Print command). This prints a page
that tells you the maximum suggested virtual memory for the printer. You then enter
the figure in this dialog box.
1. Copy the file TESTPS.TXT to the printer. This file is included with Windows
95.
• Click on the Start button, then choose Programs from the Start menu. Click on
MS-DOS Prompt in the program list; you will see a DOS window.
• Type:
copy c:\windows\system\testps.txt lpt1
• Press the Enter key, type
exit
and press the Enter key again to close the DOS
window.
The printer will produce a page which shows the maximum available virtual
memory and the maximum suggested virtual memory. Use the suggested value
(
Max Suggested VM
).
2. Enter the new suggested value into the Device Options page in the box
labeled Available printer memory (in KB).