GCC Technologies Elite XL 20ppm, Руководство пользователя

Страница: 52 / 216

3 - 6 • Using Windows 3.1
Manual Feed button on the control panel, but you must have paper ready in the
MultiPurpose feeder.
Paper Size
If you want to change the paper size, click the Paper Size drop-down menu, and
choose the paper size.
Edge-to-edge printing
The Elite XL 20ppm will print edge-to-edge on all supported paper sizes. However,
print quality is not guaranteed within 4mm of each edge.
Orientation
Use this option to change the position of the image on the page. If you choose
vertical, or
Portrait , this prints the image upright on the page. If you choose horizon-
tal, or Landscape , this prints the image sideways on the page. The default is Portrait .
Note: If you create a document and specify in the application’s page setup that it
should be vertical, then if you choose Landscape in this dialog box the image will be
cut off at the bottom.
Copies
If you want to print more than one copy, enter the figure here. The maximum
number of copies is 999.
Options
To make further changes, click on the Options button. You will see the Setup Op-
tions dialog box.
• Print to ...
If you choose Print To Encapsulated PostScript File, the document is not
printed but is saved in the location you specify as an (EPS) file. You may need
to do this if you send files to a service bureau or want to make a page into a
graphics file.
• Scaling % ...
If you change the Scaling figure from the default 100 percent, the image is
reduced or enlarged on a page. If you select 50 percent, the image prints at half
size; if you select 200 percent, the image prints at double size.
Note: We recommend that you use the application’s Scaling option and leave
the figure in the Print Options dialog box at 100 percent, unless an application
does not support scaling. If you set both this dialog box and the application’s