3-39
3.4.11 Changing function codes covered by Quick Setup
-- Menu #10 "User Setting" --
Menu #10 "User Setting" in Programming mode is used to add or delete function code to/from the set of function codes registered
for Quick Setup.
Basic key operation
(1) Turn the inverter ON. It automatically enters Running mode. In that mode, press the
key to switch to Programming mode and
display the menu screen.
(2) Move the pointer
Æ
to "10. USER SET" with the
and
keys.
(3) Press the
key to establish the selected menu and proceed to a list of function codes.
(4) Select a function code to be added, using the
and
keys.
Function codes whose names are not highlighted are not registered for Quick Setup. For addition, select a function code whose
name is not highlighted.
(5) Press the
key to add the selected function code.
(6) Select a function code to be deleted, using the
and
keys.
Function codes whose names are highlighted are registered for Quick Setup. For deletion, select a function code whose name is
highlighted.
(7) Press the
key to delete the selected function code.
(8) Press the
key to go back to the menu screen.
Figure 3.32 shows the LCD screen transition starting from Menu #10 "User Setting.".
(1) To display this menu screen, press
key in Running mode to switch to Programming mode.
List of function codes
This screen lists the function codes and their names.
(4) To add a particular function code (whose name is not highlighted), select the code (F02 in this
example) with
and
keys.
(To go back to the menu screen, press
key.)
(6) To delete a particular function code (whose name is highlighted), select the code (F01 in this
example) with
and
keys.
(To go back to the menu screen, press
key.)
(8) To go back to the menu screen, press
key.
Figure 3.32 Screen Transition for Changing Function Codes Covered by Quick Setup
(3) Press key to establish the selected menu and proceed to a list of function codes.
(5) Press key to add the selected function code to Quick Setup.
/
(2) Move the pointer
Æ
to "10. USER SET" with
and
keys.
(7) Press key to delete the selected function code from Quick Setup.
Содержание FRENIC-MEGA
Страница 36: ...2 6 Unit inch mm Refer to Section 2 3 3 9...
Страница 208: ...5 89 Examples of Sequence Circuits 1 Standard sequence 2 Sequence with an emergency switching function...
Страница 356: ...MEMO...
Страница 358: ...Fuji Electric Co Ltd Fuji Electric Corp of America http www fujielectric com fecoa 2011 04 D11 D10...
