Fuji Electric FRENIC-MEGA, Инструкция по эксплуатации

Страница: 333 / 358

7-8
Ch
ap
. 7
MAINTENAN
C
E AND
INSPE
C
T
ION
7.6.2 Product warranty
To all our customers who purchase Fuji Electric products included in this documentation:
Please take the following items into consideration when placing your order.
When requesting an estimate and placing your orders for the products included in these materials, please be aware that any items
such as specifications which are not specifically mentioned in the contract, catalog, specifications or other materials will be as
mentioned below.
In addition, the products included in these materials are limited in the use they are put to and the place where they can be used, etc.,
and may require periodic inspection. Please confirm these points with your sales representative or directly with this company.
Furthermore, regarding purchased products and delivered products, we request that you take adequate consideration of the necessity
of rapid receiving inspections and of product management and maintenance even before receiving your products.
[ 1 ] Free of charge warranty period and warranty range
(1) Free of charge warranty period
1) The product warranty period is ''3 years from the shipment date.''
2) However, in cases where the use environment, conditions of use, use frequency and times used, etc., have an effect on
product life, this warranty period may not apply.
3) Furthermore, the warranty period for parts restored by Fuji Electric's Service Department is ''6 months from the date that
repairs are completed.''
(2) Warranty range
1) In the event that breakdown occurs during the product's warranty period which is the responsibility of Fuji Electric, Fuji
Electric will replace or repair the part of the product that has broken down free of charge at the place where the product was
purchased or where it was delivered. However, if the following cases are applicable, the terms of this warranty may not
apply.
c
The breakdown was caused by inappropriate conditions, environment, handling or use methods, etc. which are not
specified in the catalog, operation manual, specifications or other relevant documents.
d
The breakdown was caused by the product other than the purchased or delivered Fuji's product.
e
The breakdown was caused by the product other than Fuji's product, such as the customer's equipment or software design,
etc.
f
Concerning the Fuji's programmable products, the breakdown was caused by a program other than a program supplied by
this company, or the results from using such a program.
g
The breakdown was caused by modifications or repairs affected by a party other than Fuji Electric.
h
The breakdown was caused by improper maintenance or replacement using consumables, etc. specified in the operation
manual or catalog, etc.
i
The breakdown was caused by a science or technical problem that was not foreseen when making practical application of
the product at the time it was purchased or delivered.
j
The product was not used in the manner the product was originally intended to be used.
k
The breakdown was caused by a reason which is not this company's responsibility, such as lightning or other disaster.
2) Furthermore, the warranty specified herein shall be limited to the purchased or delivered product alone.
3) The upper limit for the warranty range shall be as specified in item (1) above and any damages (damage to or loss of
machinery or equipment, or lost profits from the same, etc.) consequent to or resulting from breakdown of the purchased or
delivered product shall be excluded from coverage by this warranty.
(3) Trouble diagnosis
As a rule, the customer is requested to carry out a preliminary trouble diagnosis. However, at the customer's request, this
company or its service network can perform the trouble diagnosis on a chargeable basis. In this case, the customer is asked to
assume the burden for charges levied in accordance with this company's fee schedule.