Fuji Electric FRENIC-MEGA, Инструкция по эксплуатации

Страница: 89 / 358

3-32
Ch
ap
. 3
O
PERA
T
IO
N USING
TH
E KEY
P
A
D
Confirmation screen
This screen is to confirm whether to overwrite the data held in the inverter with data read out from
the keypad.
To go back to the data selection screen, press key.
"In progress" screen
A bar indicating progress appears in the bottom.
Completion screen
This screen shows that writing has completed successfully.
To go back to a list of copy functions, press key.
Figure 3.22 Screen Transition for "Writing"
Pressing
or key when writing is in progress cancels the operation and shows this ERROR
screen. (See Note below.)
The function code data in the inverter memory is incompletely modified, so do not run the inverter
as is. Be sure to perform data writing or initialization again.
In any of the following conditions, the inverter causes an error for safety.
•
No valid data is found in the keypad memory. (No data reading has been performed since factory
shipment or data reading in progress has been cancelled.)
•
Data held in the keypad memory contains any error.
•
There is a mismatch in inverter types.
•
Data writing has been performed when the inverter is running.
•
The inverter is data-protected.
•
The terminal command WE-KP ("Enable data change with keypad") is OFF.
•
The data to be written is out of the range. (The data setting range has been changed depending
upon the applied inverter capacity or the updated version of the software.)
There is no compatibility between the function code data held in the keypad memory and that in the
inverter memory. (Either data may be non-standard or updating performed results in no
compatibility. Contact your Fuji Electric representative.)
Figure 3.23 Error Screens for "Writing"
If an ERROR screen or an ERROR Ver. screen appears, press the key to reset the error condition. The screen returns to
a list of copy functions.
Upon completion of writing, the completion screen automatically appears.
If OK, press key to start writing data into the inverter memory.