Fuji Electric FRENIC-MEGA, Инструкция по эксплуатации

Страница: 90 / 358

3-33
(3) Verify
To display this menu screen, press
key in Running mode to switch to Programming mode.
List of copy functions
Use and keys to select VERIFY.
Memory area selection screen
Use and keys to select the target area (1, 2, or 3) of the keypad memory for verification.
To go back to a list of copy functions, press key.
Confirmation screen
This screen is to confirm whether to proceed to verification.
To go back to the data selection screen, press key.
"In progress" screen
A bar indicating progress appears in the bottom.
When a mismatch is found, verification is halted with the function code and its data displayed on the
LCD monitor. To resume verification from the next function code, press key again.
"In progress" screen
A bar indicating progress appears in the bottom.
Completion screen
This screen shows that verification has completed successfully.
To go back to a list of copy functions, press key.
Figure 3.24 Screen Transition for "Verify"
Press key to establish the target area.
If OK, press key to start verification.
To resume verification, press key.
Move the pointer
Æ
to "8. DATA COPY" with and keys.
Press key to establish the selected menu and proceed to a list of copy functions.
Press key to establish the selected function.
Upon completion of verification, the completion screen automatically appears.
/