Endress+Hauser Proline Promass Q 500, Руководство по эксплуатации

Страница: 142 / 280

Commissioning Proline Promass Q 500 PROFIBUS PA
142 Hauser
Parameter overview with brief description
Parameter Description Selection Factory setting
Device reset Reset the device configuration - either
entirely or in part - to a defined state. • Cancel
• To delivery settings
• Restart device
• Restore S-DAT backup Cancel
10.8 Simulation
The Simulation submenu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching valves or closed-control loops).
Navigation
"Diagnostics" menu → Simulation
‣
Simulation
Assign simulation process variable
→  143
Process variable value →  143
Status input simulation →  143
Input signal level
→  143
Current input 1 to n simulation →  143
Value current input 1 to n →  143
Current output 1 to n simulation →  143
Value current output 1 to n →  143
Frequency output simulation 1 to n →  143
Frequency value 1 to n →  143
Pulse output simulation 1 to n
→  144
Pulse value 1 to n →  144
Switch output simulation 1 to n →  144
Switch status 1 to n
→  144
Relay output 1 to n simulation →  144
Switch status 1 to n →  144