Endress+Hauser Proline Promass Q 500, Руководство по эксплуатации

Страница: 144 / 280

Commissioning Proline Promass Q 500 PROFIBUS PA
144 Hauser
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Pulse output simulation 1 to n In the Operating mode
parameter, the Pulse option is
selected.
Set and switch off the pulse
output simulation.

For Fixed value option:
Pulse width parameter
(→  114) defines the
pulse width of the pulses
output.
• Off
• Fixed value
• Down-counting
value
Off
Pulse value 1 to n In the Pulse output
simulation 1 to n parameter,
the Down-counting value
option is selected.
Enter the number of pulses for
simulation. 0 to 65 535 0
Switch output simulation 1 to n In the Operating mode
parameter, the Switch option
is selected.
Switch the simulation of the
switch output on and off. • Off
• On Off
Switch status 1 to n – Select the status of the status
output for the simulation. • Open
• Closed Open
Relay output 1 to n simulation – Switch simulation of the relay
output on and off. • Off
• On Off
Switch status 1 to n The On option is selected in
the Switch output simulation
1 to n parameter parameter.
Select status of the relay
output for the simulation. • Open
• Closed Open
Pulse output simulation – Set and switch off the pulse
output simulation.

For Fixed value option:
Pulse width parameter
defines the pulse width
of the pulses output.
• Off
• Fixed value
• Down-counting
value
Off
Pulse value In the Pulse output
simulation parameter, the
Down-counting value option
is selected.
Set and switch off the pulse
output simulation. 0 to 65 535 0
Device alarm simulation – Switch the device alarm on and
off. • Off
• On Off
Diagnostic event category – Select a diagnostic event
category. • Sensor
• Electronics
• Configuration
• Process Process
Diagnostic event simulation – Select a diagnostic event to
simulate this event. • Off
• Diagnostic event
picklist (depends
on the category
selected)
Off
Logging interval – Define the logging interval tlog
for data logging. This value
defines the time interval
between the individual data
points in the memory. 1.0 to 3 600.0 s –
* Visibility depends on order options or device settings