Endress+Hauser Proline Promass Q 500, Руководство по эксплуатации

Страница: 120 / 280

Commissioning Proline Promass Q 500 PROFIBUS PA
120 Hauser
Configuring the switch output
Navigation
"Setup" menu → Pulse/frequency/switch output
‣
Pulse/frequency/switch output 1
to n
Operating mode →  120
Terminal number →  120
Signal mode
→  120
Switch output function →  121
Assign diagnostic behavior →  121
Assign limit
→  121
Assign flow direction check →  121
Assign status →  121
Switch-on value →  121
Switch-off value →  121
Switch-on delay →  121
Switch-off delay →  122
Failure mode
→  122
Invert output signal →  122
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Operating mode – Define the output as a pulse,
frequency or switch output. • Pulse
• Frequency
• Switch Pulse
Terminal number – Shows the terminal numbers
used by the PFS output
module. • Not used
• 24-25 (I/O 2) –
Signal mode – Select the signal mode for the
PFS output. • Passive
• Active Passive