Endress+Hauser Liquistation CSF39, Руководство по эксплуатации

Страница: 40 / 188

System integration Liquistation CSF39
40 Hauser
7 System integration
7.1 Web server
Versions without a fieldbus: you require an activation code for the web server.
7.1.1 Connection
‣
Connect the communication cable of the computer to the Ethernet port of the Base2
module.
Base2
Web Browser
A0039619
 49 Web server/Ethernet connection
7.1.2 Establishing the data connection
All versions with the exception of PROFINET:
To ensure that your device has a valid IP address, you must disable the DHCP parameter in
the Ethernet settings. ( Menu / Setup / General settings / Extended setup / Ethernet /
Settings )
You can assign the IP address manually in the same menu (for point-to-point
connections).
All versions including PROFINET:
The device's IP address and subnet mask can be found at: DIAG / System information /
Ethernet .
1. Start your PC.
2. First, configure a manual IP address in the network connection settings of the
operating system.
Example: Microsoft Windows 10
3. Open Network and Sharing Center.
 Apart from your standard network, you should see an additional Ethernet
connection (e.g. as "Unidentified network" ).
4. Select the link to this Ethernet connection.
5. In the pop-up window select the "Properties" button.
6. Double-click "Internet Protocol Version 4 (TCP/IPv4)".
7. Select "Use the following IP Address".
8. Enter the desired IP address. This address must be in the same subnet as the IP
address of the device, e.g.:
 IP address for Liquiline: 192.168.1.212 (as configured previously)
IP address for PC: 192.168.1.213.
9. Start the internet browser.