Endress+Hauser HART Proline t-mass I 300 Скачать руководство пользователя страница 54

Страница: 54 / 202

Operation options

Proline t-mass I 300 HART

Hauser

Operating key(s)

Meaning

Escape key combination (press keys simultaneously)

In a menu, submenu

• Pressing the key briefly:

• Exits the current menu level and takes you to the next higher level.
• If help text is open, closes the help text of the parameter.

• Pressing the key for 2 s returns you to the operational display ("home position").

With a Wizard

Exits the wizard and takes you to the next higher level.

With a text and numeric editor

Close the editing view without accepting the changes.

Minus/Enter key combination (press the keys simultaneously)

• If the keypad lock is active:

Press the key for 3 s: deactivate the keypad lock.

• If the keypad lock is not active:

Press the key for 3 s: the context menu opens along with the option for activating the
keypad lock.

7.3.5

Opening the context menu

Using the context menu, the user can call up the following menus quickly and directly from

the operational display:
• Setup

• Data backup

• Simulation

Calling up and closing the context menu

The user is in the operational display.

1. Press the  and  keys for longer than 3 seconds.

 The context menu opens.

XXXXXXXXXX

l/h

Setup

Conf.backup

Simulation

Keylock on

A0034608-EN

2. Press  +  simultaneously.

 The context menu is closed and the operational display appears.

Calling up the menu via the context menu

1. Open the context menu.
2. Press  to navigate to the desired menu.
3. Press  to confirm the selection.

 The selected menu opens.

Содержание HART Proline t-mass I 300











































































































































































































Результаты поиска

Содержание HART Proline t-mass I 300

Отзывы:

Похожие инструкции для HART Proline t-mass I 300

Бренды по названию

Популярные бренды

Endress+Hauser HART Proline t-mass I 300, Руководство по эксплуатации

Результаты поиска

Содержание HART Proline t-mass I 300

Отзывы:

Похожие инструкции для HART Proline t-mass I 300

Бренды по названию

Популярные бренды